FLIPR
®
Tetra High Throughput Cellular Screening System User Guide
0112-0109 H 61
Tools Menu
Item Description
Set Default
Directories
Opens the Set Default Directories dialog to
designate directories in which to store protocol and
data files, signal tests, group templates and to which
export files are written.
The Open > Protocol, Data and Image File
commands in the File menu open to the folders set
here, as do the File > Export dialogs. In addition,
Group Templates *.fmg can be exported and
imported from the default folder defined in the
directory.
The default protocol directory is:
C:\Documents and
Settings\[your_user_name]\My
Documents\Molecular
Devices\ScreenWorks\MyProtocols
[MyData, MySignalTests, or
MyGroupTemplates]
The default data and export directories are:
C:\Documents and
Settings\[your_user_name]\My
Documents\Molecular
Devices\ScreenWorks\MyData \
The default signal test directory is:
C:\Documents and
Settings\[your_user_name]\My
Documents\Molecular
Devices\ScreenWorks\MySignalTests
The default group template directory is:
C:\Documents and
Settings\[your_user_name]\My
Documents\Molecular
Devices\ScreenWorks\MyGroupTemplates
Note: It is recommended that you save all
protocol and data files on the local hard drive to
ensure instrument function or data is not lost if
your server fails during an experiment.
Plate Library Opens the Plate Process Definition dialog, which
lists current plate definitions and allows you to add
additional plate definitions to the system. See Plate
Process Definition on page 62 for details.