Robotic Integration
254 0112-0109 H
Command Parameters
There are no parameters associated with this command.
Example Command Line
stopexperiment<CR>
Example Response
ok<CR> or c55, error string <CR>
Suggested Steps in Command Usage
• Check if instrument is functioning fine.
• Make sure experiment is running.
• Send stopexperiment command.
• Response will be OK, confirming that command execution has
begun, or a Condition code related to the command indicating
that execution could not begin.
• Monitor status for completion, and error status for any other
kind of error.
Command Specific Error Responses
• Instrument is not functionalCondition code is 00
• No experiment is runningCondition code is 55
Clearerror<CR>
Command Description
Cleans error in case recoverable error occurred.
Command Parameters
There are no parameters associated with this command.
Example Command Line
clearerror<CR>
Example Response
ok<CR>
Suggested Steps in Command Usage
• Check instrument status.
• Check if error is occurred.
• Send clearerror command.
To Next Page
Loading...
Need help?
General
