ScreenWorks Software Overview
106 0112-0109 H
Batch Export
Manual export of files is accessed through File > Export, File or Batch
Export. Manual Export allows the same files as defined above to be
exported. In addition to individually exporting files, Batch Export
enables batches of data files to be exported to individual or single
export files.
The table below describes the settings and options of the Batch Export
dialog box:
When batch exporting data, the export files produced will vary
depending on the options you select in the individual export statistic,
time sequence and group statistic sections. If a single export file is
desired for each data file exported, select Use name of data file in the
respective section you want to export. Export files created using this
Item Description
Export
Directory
User defines where export files are to be sent. The
default export folder is:
C:\Documents and
Settings\[your_user_name]\My
Documents\Molecular
Devices\ScreenWorks\MyData
Batch Export
Following Files
Selecting Add opens the Open File dialog box to
choose data files to be exported.
Note: Hold down the Shift or Ctrl key to select
data files.
Correction
Options
During export, either the existing or new corrections
can be applied.
Use corrections already applied in each data file—
Applies the existing corrections saved with each data
file during export.
Use same corrections for all files—Applies and saves
new corrections to all data files. Useful when exporting
all data files with same parameters or saving the same
correction to multiple data files. Details regarding
available corrections can be found under Correction on
page 92.
If an error
occurs while
trying to export
a file, do the
following
Put up an error message and let me decide what
to do—Enables the user to decide how to proceed when
an error is encountered.
Skip the file—Does not include the data in the export,
but continues to export data. The option to write the
error to a log file is available.
To Next Page
Loading...
Need help?
General
