Molecular Devices FLIPR Tetra User Manual

FLIPR
®
Tetra High Throughput Cellular Screening System User Guide
0112-0109 H 251
Openprotocol<TAB>File Name<CR>
Command Description
This command opens the specified protocol. Any documents open
before this command is sent will be closed automatically. Only one
protocol may be open at the time.
Command Parameters
There is one parameter, file name, for this command.
File name parameter will be the complete file name of the protocol to
be opened, including path and file type identifier (*.fmp).
Example Command Line
openprotocol<TAB>c:\screenworks\protocols\myprotocol.fmp<CR>
Example Response
ok<CR> or c30, error string <CR>
Suggested Steps in Command Usage
• Make sure experiment is not running.
• Send openprotocol command.
• Response will be OK, that confirming command executed or
Condition code related to command, that confirming command
could not execute.
Command Specific Error Responses
• Experiment is runningCondition code is C25
• Protocol not foundCondition code is C30
• Protocol could not be openCondition code is C35
• Invalid protocol nameCondition code is C36
Findprotocols<TAB>Folder<CR>
Command Description
This command returns all the protocols in the specified folder. The
command will return a comma-delimited list containing all of the *.fmp
type files saved in the indicated directory. Each of these files will NOT
be checked to confirm that the protocols that they contain are valid for
the current instrument configuration.

Molecular Devices FLIPR Tetra Specifications

General

Brand	Molecular Devices
Model	FLIPR Tetra
Category	Laboratory Equipment
Language	English