FLIPR
®
Tetra High Throughput Cellular Screening System User Guide
0112-0109 H 245
ok<CR>
errorcode, error string<CR>
status<CR>
• ok<CR> indicates the command was started successfully or
command is executed successfully.
• errorcode, error string<CR> indicates command failed
because of either an indicated condition or an instrument error.
Error codes will be followed by a comma, a space, and then a
string describing the error of up to 300 characters. Error strings
are entirely lower case.
• status<CR> is the formatted status text which was requested.
Version<CR>
Command Description
This command returns the version string for the automation interface
command set.
This command is only supported for versions 1.1 and above. Earlier
versions will return an error (c69, badly formed or unrecognized
command) in response to this command.
Command Parameters
There are no parameters associated with this command.
Example Command Line
version<CR>
Example Response
1.1<CR> or c69, badly formed or unrecognized command.<CR>
Suggested Steps in Command Usage
This should be the first call made to the instrument after making a
TCP/IP connection to ScreenWorks Software. To ensure problem free
operation of your application for FLIPR
®
Tetra System customers, the
robotic integrator should consider limiting use of the application to
interface versions they have tested.
To Next Page
Loading...
Need help?
General
