Index-7
Gate Switch input 2-49
GOS 2-25
GOS1 2-51
GOS2 2-51
GOV 2-25, 2-48, 2-51
GOV Input Low message 2-70
Governor overspeed 2-51
governor overspeed switch 2-51
GP PLD 2-25
GPI 2-49
GPO 2-49
Ground 2-31
Grounding 1-20
Group to Car Data 2-16
GS 2-25, 2-49
GS Open-Running message 2-70
GSB 2-26
H
Hall Bus Inventory 2-17, 2-33
Hall Bus Test 2-17
Hall Call Canceled Due To 2-17, 2-33
Hall Call Inventory 2-33
Hall Call Loss 1-6
Hall Call Node Wiring 1-46
hall call statistics per hour 2-33
Hall Call Test 2-33
Hall Call Timer 2-8
HALL CALLS 1-12
Hall Calls 1-43
Hall Calls Bypassed 2-70
Hall Calls Disabled message 2-70
HAPS 2-26, 2-51
HC 2-26
HC CANCEL 2-20
HCF 2-26
HCT 2-26
HDATA 2-45
HDB 2-26
HDB Switch Fault message 2-70
HDBO 2-26
HDBOB 2-26
Heavy Load message 2-71
High Speed 2-13
HLI - Heavy Load Input 1-50
Hoist Access Construct message 2-71
Hoist Access Inspection message 2-71
Hoistmotor Speed 2-13
Hoistway Access 2-5
Hoistway door bypass 2-41
Hoistway Door Bypass switches 2-71
Hoistway Learn 1-10, 1-14, 1-52, 2-15
Hoistway Setup 2-9
HOLD current 1-25
Home screen 2-2
Hourly Statistics 1-16, 2-17, 2-33
Humidity 1-5
Hydraulic Auxiliary Power Supply 3-10
I
ICE-COP-2 1-18
ICEN 2-26
ICEN/IN1 2-5, 2-45
ICPD 2-26
ICPD/IN3 2-5, 2-45
ICPU 2-26
ICPU/IN2 2-5, 2-45
ICTD 2-26, 2-45
ICTU 2-26, 2-45
Idle Door Open 2-7
IGBT FLT LED 1-26
ignore DOB (Door Open Button) input 2-6
ignore PHE (Photo Eye) input 2-6
ignore SE(Safety Edge) input 2-6
Import & Apply Settings from USB Drive 1-14, 2-29
Import Parameters 2-15
In car inspection 2-45
In car inspection DOWN 2-45
In car inspection enable 2-45
IN1H 2-26
IN2H 2-26
INA 2-26, 2-45
INAO 2-26
In-Car Construct/Bypass message 2-71
In-car Construction message 2-71
In-Car Insp/Bypass message 2-71
In-Car Inspection message 2-71
INCP 2-26, 2-45
INCT 2-26, 2-46
INCTD 2-26
INCTO 2-26
INCTU 2-26
IND 2-26
IND SERV 2-20, 2-26
Independent Mode message 2-71
Independent Service 1-8
Input Mismatch Faults 2-52
Input, Output Assignment 2-3
Input/Output Assignment 2-3, 2-7
Inputs 2-7
INSP/NORM mode 2-41
Inspect Overspeed 2-13
Inspect Slew Filter 2-14
Inspect Slew Rate 2-13
Inspection Enable 2-41
Inspection Fault Bypass 1-6, 2-15
inspection inputs 2-7
Inspection Invalid message 2-72
Inspection Mode 2-42
Inspection Operation 1-5
Inspection overspeed 1-66
Inspection Speed (Fast) 2-13
Inspection Speed (Slow) 2-13
Inspection UP/DOWN 2-41
Installation Checklist 1-20
Intended direction display 1-13
Invalid Access Zone message 2-72
Invalid Mode message 2-72
Inventory Hall Calls 2-33
To Next Page
Loading...
Need help?
General
