MR TAPCON 230 basic User Manual

7 Functions and settings
© Maschinenfabrik Reinhausen 2012 2117246/02 EN TAPCON® 230 basic 129
To set the operation counter, proceed as follows:
1. > Configuration > General >
4x
.
<04> Operation Counter.
2. Press
to highlight a digit.
The digit position you want is highlighted
and the value can be changed.
3. Press
to increase the value or to
reduce it.
4. Press
.
The operation counter is set.
7.4.2.6 Activating/deactivating display dimming
If this function is active and you do not press a key for 15 minutes, the display
is automatically dimmed. However, the display can still be read. Activating this
function extends the lifespan of the display. The display returns to full bright-
ness by pressing any key.
To activate/deactivate display dimming, proceed as follows:
1. > Configuration > General >
5x
.
<05> Display Dimming.
2. Press
or to to activate
(On)/deactivate (On) dimming of the display.
3. Press
.
Display dimming is activated/deactivated.

MR TAPCON 230 basic Specifications

General

Brand	MR
Model	TAPCON 230 basic
Category	Controller
Language	English