MR TAPCON 230 basic - Page 97

7 Functions and settings
© Maschinenfabrik Reinhausen 2012 2117246/02 EN TAPCON® 230 basic 97
7.3.12.6 Activating/deactivating V> overvoltage blocking
You can activate and deactivate the overvoltage blocking. If overvoltage
blocking is deactivated, then the rapid return control (page 96) is used.
To activate/deactivate the overvoltage blocking, proceed as follows:
1. > Control Parameters > Limit
Values > 5x
.
<05> V> Blocking Overvolt.
2. Press
or to to activate
(ON)/deactivate (OFF) overvoltage blocking.
3. Press
.
Overvoltage blocking is activated/deactivated.