11 Remote control EFA-200/-300
11-14
Only for Spectrum FFT mode
✓ The “Stop” state should be activated.
Write/action
commands
Read commands Range of p Meaning or
Unit of p
Marker tool
C196 <p> C197 0 = Deactivated
1 = Activated
NEXT or ESC
Choose marker position
C198 <p> C199 1...9 Running index
Read measured value at marker position
– C201 – Unit:
like selection
Format:
<SCI4D>
Read frequency at marker position
– C203 – Unit: Hz
Format: <FP4D>
Read reference value of display
– C205 – Unit:
like selection
Format:
<SCI4D>
Start measured value transfer
C206 – – Spectral values
normalized to
reference value
Interrupt measured value transfer
C208 – –
Table 11-8 Remote control commands, reading out current measured values,
only for Spectrum FFT mode
To Next Page
Loading...
