NARDA EFA-200 - Page 92

7 Measurement data memory EFA-200/-300
7-10
Collecting measurement values
All the values measured during the measurement are initially collected and
stored in a data pool.
Measured values are stored only when the Matrix measurement screen is
active.
All the values recorded and saved during a sequence of measurements are
only saved as a contiguous data set when the sequence of measurements
has been completed.
Switching between the MEM MATRIX menu and the Matrix
measurement screen
⇒ Press F4.
If MEM MATRIX was active, the Matrix measurement screen appears.
If the Matrix measurement screen was active, the MEM MATRIX menu
opens.
Figure 7-4 Matrix measurement screen
12 3
4
5
678
9
10