Native Instruments MASCHINE STUDIO User Manual

The Controller menu allows you to display the settings for the desired device.
This menu can hold up to two entries, depending on the device(s) focused on that MASCHINE
instance:
▪ No device focused on that instance: The Controller menu is empty and all settings in the
Hardware page are grayed out and inactive. To modify the settings of a device from that
MASCHINE instance, the device must be connected to your computer and focused on that
instance.
▪ One device (MASCHINE or KOMPLETE KONTROL S-SERIES) focused on that instance:
The Controller menu holds only one entry for that device. This entry is always selected and
you can adjust the settings for that device.
▪ Two devices (one controller from the MASCHINE family and one KOMPLETE KONTROL S-
SERIES keyboard) focused on that instance: The Controller menu holds an entry for each
focused device and you can choose which settings you want to edit.
►
When two devices are focused on the MASCHINE instance, click the Controller menu at
the top of the Hardware page in the Preferences panel and select the particular device of
which you want to edit the settings.
→
Upon your selection all settings underneath are updated accordingly.
Basic Concepts
Preferences
MASCHINE STUDIO - Manual - 108

Native Instruments MASCHINE STUDIO Specifications

General

Brand	Native Instruments
Model	MASCHINE STUDIO
Category	Recording Equipment
Language	English