Parameter Description
FREQ Section
Coarse This is used to define the basic frequency of the Freq Shifter.
Fine Fine-tune the frequency here.
OUTPUT Section
Feedback Adjusts the amount of output signal fed back into the input.
Increasing this parameter will increase the intensity of the
effect.
Stereo This parameter widens the stereo field of the effect.
Invert Inverts the settings of the Freq Shifter.
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
The Freq Shifter on the controller.
12.3.5 Phaser
Classic phaser with LFO and envelope modulation.
Effect Reference
Modulation Effects
MASCHINE STUDIO - Manual - 690
To Next Page
Loading...
