Autoload is not available when browsing Projects.
Autoload is not available when browsing Samples with Prehear enabled — see section
↑3.3.2, Auditioning Your Samples. When Prehear is enabled, Button 5 and 6 select the
previous/next Sample in the result list without loading it automatically.
3.3.2 Auditioning Your Samples
When you are browsing Samples, a Prehear button and Prehear Volume slider appear next to
the Autoload button.
The Prehear controls.
►
Click the Prehear button (showing a little speaker icon) to enable/disable Prehear.
When Prehear is enabled, you can directly hear Samples as you select them in the Result list
of the LIBRARY pane or FILES pane.
►
Drag the Prehear Volume slider next to the Prehear button to adjust the volume of the
Samples you are pre-listening to.
The Prehear signal is sent to the Cue bus of MASCHINE. This allows you to pre-listen to Sam-
ples on a distinct output pair (e.g., in your headphones) without affecting MASCHINE’s main
output! For more information on the Cue bus, see section ↑9.2.6, Using the Cue Bus.
Prehear is particularly useful on your controller! See below for more details.
Prehear and Autoload are mutually exclusive: Only one of them can be active at a time.
For more information on the Autoload feature, see section ↑3.3.1, Loading the Selected
Files Automatically.
Auditioning Your Samples using the Controller
When browsing Samples on your controller:
Browser
Additional Browsing Tools
MASCHINE STUDIO - Manual - 154
To Next Page
Loading...
