2. Press Button 7 and 8 to select the desired Pattern bank.
3. Press ERASE + the pad corresponding to the Pattern you want to delete.
→
The Pattern is deleted.
If the desired Pattern bank is already selected (or if there is only one Pattern bank), this
alternate method can be simplified as follows: Press ERASE + PATTERN + pad to delete
the corresponding Pattern!
If the Pattern was referenced by Clips in the Arranger, these Clips will be removed as
well!
7.7.5 Creating and Deleting Pattern Banks
You can create and delete Pattern banks in order to organize your Patterns to your liking.
Creating a Pattern Bank
If the last Pattern bank contains at least one Pattern (even empty), you can create an addition-
al Pattern bank after that last bank. To do this:
1. Open the Pattern Manager (see ↑7.7.1, The Pattern Manager and Pattern Mode).
2. Click the “+” symbol under the last pad grid on the right to create another Pattern bank.
→
A new empty Pattern bank is created and its pad grid appears in place of the “+” symbol.
Working with Patterns
Managing Patterns
MASCHINE STUDIO - Manual - 424
To Next Page
Loading...
Need help?
General
