+PATTERNS is only available when browsing Groups.
Loading Groups with Patterns using the Controller
When browsing Groups on your controller:
►
Press SHIFT + Button 4 (+ PATTERNS) to include or exclude Patterns when Groups are
loaded.
→
When the option is enabled (Button 4 lit and + PATTERNS label highlighted), Groups are
loaded together with their Patterns.
3.3.4 Loading Groups with Routing
The + ROUTING button allows you select whether your audio and MIDI routing is preserved
when loading a new Group from the Browser. When the + ROUTING button is selected, your
audio and MIDI routing configuration is preserved when loading a new Group from the Browser.
This allows you to conveniently load new Groups without having to reconfigure your Audio and
MIDI settings each time. When the + ROUTING button is deselected, the default routing and
MIDI settings will be loaded when a new Group is loaded, overriding any configuration you may
have created.
►
Press SHIFT + Button 3 (+ ROUTING) to include or exclude Patterns when Groups are
loaded.
→
When the option is enabled (Button 3 lit and + ROUTING label highlighted), Groups are
loaded together with their Routing.
►
Press SHIFT + Button 3 (+ ROUTING) to include or exclude Patterns when Groups are
loaded.
→
When the option is enabled (Button 3 lit and + ROUTING label highlighted), Groups are
loaded together with their Routing.
►
Press SHIFT + Button 3 (+ ROUTING) to include or exclude Patterns when Groups are
loaded.
Browser
Additional Browsing Tools
MASCHINE STUDIO - Manual - 156
To Next Page
Loading...
