8.1.5.2 Configuring External Inputs for Sounds in MASCHINE STUDIO
All input channels, including individual mono L and R channels can be found at the bottom of
the input selection drop-down menus. Pressing the IN button on MASCHINE STUDIO will tog-
gle through Stereo, Left, and Right inputs, and metering of mono inputs is shown as dual-
mono.
To configure an external input for a Sound:
1. Select the Group and Sound for external sound source input.
2. Press CHANNEL.
3. Press Button 5 repeatedly to select INPUT.
4. Press Button 3 SOUND.
5. Turn Knob 1 to select the input source.
→ The list of stereo and mono inputs are available for selection.
8.2 Using MIDI Control and Host Automation
MASCHINE provides you with flexible MIDI remote control and host automation facilities that
can be used in many situations.
Incoming MIDI and Host Automation
MASCHINE’s Master, Groups and Sounds can be controlled via MIDI and the host (when MA-
SCHINE is running as a plug-in), both globally and individually:
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MASCHINE STUDIO - Manual - 473
To Next Page
Loading...
