→
All slices are deleted from the current sample.
Deleting All Slices after They Have Been Applied to the Pattern Editor
If you have committed your Slices using the APPLY option, you must return to Edit mode and
apply the DELETE ALL option to fully remove them from the Keyzone and Pattern.
To delete all Slices after they have been applied:
1. Press the SAMPLING button to enter the Sampler.
2. Press button 4 EDIT to return to Edit mode.
3. Press Button 8 to select DELETE ALL to delete all slices.
4. Press Button 4 EDIT to exit EDIT Mode.
5. Press APPLY to remove the Slices from the Sound or Group.
→
All extra Slices and Keyzones will be deleted leaving just the first Keyzone in place.
14.4.4 Manually Adjusting Your Slices
In addition to the Detect, Split, Grid, and Manual modes that create Slices automatically (see
section ↑14.4.2, Adjusting the Slicing Settings above), you can also adjust Slices manually us-
ing your mouse, the waveform display, and the various edit tools at your disposal.
You can directly adjust your Slices manually by selecting Manual in the MODE selector,
or start from MASCHINE’s proposed Slices as described in section ↑14.4.2, Adjusting
the Slicing Settings and fine-adjust these Slices manually — in that case the MODE se-
lector automatically switches to Manual.
Sampling and Sample Mapping
Slicing a Sample
MASCHINE STUDIO - Manual - 848
To Next Page
Loading...
Need help?
General
