The Lofi on the controller.
12.6.3 Saturator
The Saturator is a flexible tool allowing you to apply various types of saturations to your signal.
The Saturator offers three modes: Classic (legacy mode), Tape, and Tube. You can select the
desired mode via the Mode selector. Since the three modes provide different sets of parame-
ters, each of them is described separately below.
The Saturator panel (here in Tube mode) in the Plug-in Strip.
Classic Mode
The Classic mode is the legacy mode. It combines compression and saturation to increase the
overall loudness and add additional harmonics.
Effect Reference
Distortion Effects
MASCHINE STUDIO - Manual - 719
To Next Page
Loading...
