As in every Drumsynth, the engine can be selected via the Engine selector on the Main page.
Each engine has a different character and set of parameters, as detailed in the following sec-
tions.
The Hi-hat provides following engines:
▪ Silver (default): ↑10.4.1, Hi-hat – Silver.
▪ Circuit: ↑10.4.2, Hi-hat – Circuit.
▪ Memory: ↑10.4.3, Hi-hat – Memory.
In addition, we mention how to use Choke groups with Hi-hat Plug-ins to emulate a closed vs.
open hi-hat set up: ↑10.4.5, Creating a Pattern with Closed and Open Hi-hats.
For more information on engines, see ↑10.1.1, Engines: Many Different Drums per
Drumsynth. For general information on the Snare and the other Drumsynths, see ↑10.1,
Drumsynths – General Handling.
10.4.1 Hi-hat – Silver
The Silver engine is the default engine of the Hi-hat.
A classic analog hi-hat that can also be used as percussion or sound effect.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See ↑9.4, The Plug-in Strip for more information on this.
Main Page
Element Description
MAIN Section
Engine Selects the engine used in the Hi-hat Plug-in. If you change this
setting, please refer to ↑10.4, The Hi-hats.
Using the Drumsynths
The Hi-hats
MASCHINE STUDIO - Manual - 585
To Next Page
Loading...
