Parameter Description
Feedback Adjust the amount of output signal fed back into the input.
Tone General tonal characteristic of the feedback signal.
Tone Mod Modulation introduced in the feedback signal.
OUTPUT Section
Gate The Gate button is used to cancel out feedback loops
introduced by high Feedback settings.
Release This parameter determines how fast the distorted sound dies
down when the Gate is enabled.
Mix Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
The Distortion on the controller.
12.6.2 Lofi
The Lofi effect reduces the bit depth (or bit resolution) and Sample rate of the audio signal for
an interesting “vintage” effect at subtle settings, and heavy digital distortion at extreme set-
tings.
Effect Reference
Distortion Effects
MASCHINE STUDIO - Manual - 717
To Next Page
Loading...
