The Phaser panel in the Plug-in Strip.
The Phaser in the Control area.
Parameter Description
MAIN Section
Frequency This defines the center frequency of the Phaser.
Feedback Adjusts the amount of output signal fed back into the input.
8Pole Activating this causes the Phaser to use the 8Pole mode,
resulting in a more intense phasing effect.
MOD Section
Amount This defines how much the Phaser gets modulated by the
modulation source.
Source Here you can select the modulation source of the Phaser:
available options are LFO, LFO Sync, and Envelope. Depending
on your selection, the parameter to the right will change.
Effect Reference
Modulation Effects
MASCHINE STUDIO - Manual - 691
To Next Page
Loading...
