Element Description
Decay Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Tension Adjusts the tension of the drum skin, measured as a percentage,
allowing for a longer and bigger pitch bend. Available values range
from 0.0 to 100.0 % (default).
Impact Adjusts how hard the drum is hit, measured as a percentage.
Available values range from 0.0 % (softest) to 100.0 % (hardest).
The default value is 80.0 %.
Flex Adjusts the elasticity of the skin, measured as a percentage,
allowing for a greater pitch bend when the drum is hit. Available
values range from 0.0 to 100.0 % (default: 30.0 %).
MUTE Section
Skin Adjusts the amount of damping applied to the drum skin, measured
as a percentage. Available values range from 0.0 % (default) to
100.0 %.
Air Adjusts the amount of damping applied to the air, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).
Advanced Page
For this engine the Advanced page does not contain any parameters.
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Using the Drumsynths
The Toms
MASCHINE STUDIO - Manual - 603
To Next Page
Loading...
Need help?
General
