Element Description
Tune Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 33.00 to
57.00. The default value is 45.00. For more details see ↑10.1.5,
Pitch Range, Tuning, and MIDI Notes.
Decay Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Puff Adjusts the amount of feedback noise applied to the drum,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 25.0 %).
Damp Adjusts the damping amount, measured as a percentage. Available
values range from 0.0 % (default) to 100.0 %.
Impact Adjusts the amount of attack. Available values range from 0.0 %
(soft attack) to 100.0 % (maximum attack). The default value is
60.0 %.
Advanced Page
For this engine the Advanced page does not contain any parameters.
Modulation Page
As with all other engines and Drumsynths, the Modulation page contains one parameter: Veloc-
ity.
Using the Drumsynths
The Percussions
MASCHINE STUDIO - Manual - 611
To Next Page
Loading...
Need help?
General
