►
Select the desired Section by clicking its name at the top of the Arranger view:
→
The Section name is now highlighted and underlined to indicate that this Section is se-
lected.
Selecting a Section and a Section Bank in the Section Manager
To select a Section in the Section Manager, do the following:
1. Open the Section Manager (see ↑13.3.1, Section Management Overview).
2. If it is not already selected, select the Section bank containing the desired Section by
clicking its pad grid on the right.
The selected Section bank is surrounded by a white border, and the left part of the Sec-
tion Manager displays the Section slots in that bank.
Working with the Arranger
Using Arranger View
MASCHINE STUDIO - Manual - 778
To Next Page
Loading...
