→ The MIDI Change dialog appears.
In the MIDI Change dialog:
1. In Scene option click the Enabled checkbox to enable Scenes in the Ideas view to be trig-
gered. In Section option, click the Enabled checkbox to enable Sections in the Arranger
view to be triggered.
2. In the Source submenu, select the name of your controller.
3. In the Trigger submenu for Scene and Section, select MIDI Note to trigger via MIDI notes,
Program Change to trigger via MIDI Program Change messages, or None (default setting)
to disable MIDI Change completely.
4. In the Channel submenu, select the MIDI channel the Scenes or Sections should receive
MIDI messages from (channel 2 by default for Scenes and channel 1 by default for Sec-
tions).
Working with the Arranger
Triggering Sections or Scenes via MIDI
MASCHINE STUDIO - Manual - 802
To Next Page
Loading...
