Electra Elite IPK II Document Revision 4C
Trunk Group Routing 2 - 993
14-05-01 Trunk Group – Trunk Group Number
Assign trunks to trunk groups.
Trunk Groups: 1~100
(default :All trunks assigned to Trunk Group 1)
14-06-01 Trunk Group Routing – Priority Order Number
Set up an outbound routing table for trunk groups assigned in Program 14-05.
Trunk Group Routes: 1~100
Default:
Route 1, Order Number 1 = 1 (Trunk Group 1)
Order Numbers 2~4 = 0 (Not Specified)
All other Routes (2~100) and Order Numbers (1~4) = 0 (Not Specified)
14-07-01 Trunk Access Map Setup – Trunk Port Number
Access Map programming may limit Trunk Group Routing options.
Trunk Access Maps: 1~200
Default:
Access Map 1 = Trunk Ports 1~200 assigned with Option 7 (Incoming, Outgoing, and Trunk on
Hold access).
Access Maps 2-~200, Trunk Ports 1~200 assigned Option 0 (No Access)
15-06-01 Trunk Access Map for Extensions
Access Map programming may limit Trunk Group Routing options.
Trunk Access Maps: 1~200
15-07-01 Programmable Function Keys
Assign a function key for Trunk Group Routing access (code
02 + trunk group #).
Trunk Groups: 1~100
21-02-01 Trunk Group Routing for Extensions
Assign the trunk routes to extensions.
Trunk Group Routes: 1~100
(default: 1)
21-15-01 Individual Trunk Group Routing for Extensions
Designate the trunk route accessed when a user dials the Alternate Trunk Route Access Code
assigned in Program 11-09-02. Trunk Group Routing is set up in Program 14-06.
Trunk Group Routes: 1~100
[default: 0 (No Setting)]
23-03-01 Universal Answer/Auto Answer
Assign trunk routes set in Program 14-06 to extensions for Universal Answer. If the call ringing
the paging system is in an extension assigned route, the user can dial the Universal Answer
code (#0) to pick up the call. This program also allows an extension user to automatically answer
trunk calls ringing other extensions, based on Trunk Group Routing programming (defined in
Program 14-06).
Trunk Group Routes: 1~100
(default: 0)
To Next Page
Loading...
