NEC Electra Elite IPK II System - Page 1067

Electra Elite IPK II Document Revision 4C
Universal Slots 2 - 1043
BSU(2S)-U20 ETU This Slave 2-Base Station Unit for
Wireless DECT has connections for
two Base Stations and must be used
with the BSU(4M)-U20 ETU. This ETU
is installed in the first or second slot to
the left of the BSU(4)-U20 ETU.
2 2 Notes 1, 2
BSU(6S)-U20 ETU This Slave 6-Base Station Unit for
Wireless DECT has connections for six
Base Stations and must be used with
the BSU(4M)-U20 ETU. This ETU is
installed in the first or second slot to
the left of the BSU(4)-U20 ETU.
2 2 Notes 1, 2
CCH(4)-U( ) ETU This 4-Channel – Common Channel
Handler (CCH) for K-CCIS provides
four K-CCIS routes to coordinate
receiving common channel data from a
distant system or to coordinate
sending it to a distant system.
11
HUB(8)-U( ) ETU This 8-port Switching HUB is an
optional Ethernet interface that
supports eight internet ports. Each
port has two LEDs that indicate status
and activity. One port can be a source
port, and another port can be used to
mirror source and monitor data traffic.
One ETU can be installed in slots
S1~S8 in each cabinet. This ETU
cannot be installed in a KSU that
contains EliteMail VP and IVR or CTI
and IVR systems.
1 1 Note 1
IAD(8)-U( ) ETU
configured for ESI
For MEGACO Station 3 14
IAD(8)-U( ) ETU
configured for
CCISoIP
For CCISoIP 6 22 Note 3
PVA(X)-U( ) ETU as
an IP Station
(MEGACO)–MG16
For MEGACO Station 2 13
Table 2-43 Maximum System Capacities for Application Interface ETUs (Continued)
Application
Interface ETUs
Description
Maximum Capacities
Notes
Basic Port
Package
Expanded
Port Package