NEC Electra Elite IPK II System - Page 1099

Electra Elite IPK II Document Revision 4C
Voice Over 2 - 1075
Required Component(s)
None
Related Features
Conference
Off-Hook Signaling
Programmable Function Keys
Programming
 11-12-41 Service Code Setup (for System Access) – Voice Over
The service code used for the Voice Over feature (default: 690).
 11-16-08 Single Digit Service Code Setup – Voice Over.
Service code used for the Voice Over feature (default: 6).
 15-07-01 Programmable Function Keys
Assign a function key for Voice Over (code 48).
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
 20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook Signaling
(Automatic Override)
Enter 1 if you want callers to a busy extension to hear busy/ring tone. Enter 0 if you want callers
to hear busy tone. The caller must then dial 7 to activate Intercom Off-Hook Signaling.
(default: 1)
 21-01-03 System Options for Outgoing Calls – Trunk Interdigit Time (External)
Set the time (0~64800 seconds) the system waits to expire before placing the call in a talk state
(Call timer starts after time expires. Voice Over and Barge-In are not allowed until this time
expires).
(default: 5)