NEC Electra Elite IPK II System - Page 1100

Document Revision 4C Electra Elite IPK II
2 - 1076 Voice Over
Operation
To initiate a Voice Over to a busy extension:
1. Press Voice Over key (PRG 15-07 or SC 751: 48)
- OR -
Dial 6.
- OR -
Dial 790.
 You hear an alert tone and the Voice Over key flashes. You can talk to the called party after the alert tone ends.
 To use Service Code 790 for Voice Over, Program 11-16-09 (Voice Mail Service Code) must be undefined.
To respond to a Voice Over alert tone to your extension:
You can respond only if you have a Voice Over key.
1. Press the Voice Over key.
 The Voice Over key lights steadily (green) and you can talk to the interrupting party.
 You cannot respond by dialing the Voice Over Service Code (6).
To return to your original call:
1. Press the Voice Over key.
2. Press the Voice Over key again.
 Your Voice Over key flashes red when you are talking to your original call.
 To switch between your original call and the interrupting party, just keep pressing the Voice Over key.