Document Revision 4C Electra Elite IPK II
2 - 106 Call Appearance (CAP) Keys
All Flexible Line keys on a multiline terminal can be assigned as CAP keys in System
Programming.
A conference call involving two outside lines cannot reside on one Call Appearance key.
For Call Appearance (CAP) Keys, trunks must be assigned to trunk group 1 or higher
(Program 14-05-01). Trunk Group 0 indicates KF (Key Function) mode.
CAP Keys can be programmed from 0001~9999. 0000 assigns the next available CAP
Key.
Trunk Group (
02), Virtual Extension (03) and Call Appearance (CAP) Key (08), codes
cannot be programmed on a DSS Console as the system does not allow entry of the
additional data required.
If you have a trunk line key and Call Appearance (CAP) Key for the same trunk, the line key
has priority. An incoming call rings the trunk line key and when answered, the trunk line
keys lights, not the CAP Key. When you access the trunk for an outgoing call, the Trunk
line key lights, not the Call Appearance (CAP) Key.
Default Setting
Disabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Automatic Route Selection
Call Arrival (CAR) Keys
Central Office Calls, Answering
Central Office Calls, Placing
To Next Page
Loading...
