NEC Electra Elite IPK II System User Manual

Document Revision 4C Electra Elite IPK II
2 - 108 Call Appearance (CAP) Keys
Operation
To place an outgoing call on hold and retrieve it using a multiline terminal:
1. Use the handset to go off-hook, and wait for internal dial tone.
- OR -
Press Speaker and wait for internal dial tone.
2. Dial the Trunk Access Code (default: 9).
3. Dial the outside party (the Call Appearance key lights). Begin your conversation.
4. Press Hold (the Call Appearance key flashes).
5. Press the flashing Call Appearance key to retrieve the call.
To receive an incoming call, put it on hold and then retrieve it using a Multiline Terminal:
1. Receive CO/PBX incoming ring.
2. Use the handset to go off-hook, or press Speaker (the Call Appearance key lights). Talk with
outside party.
3. Press Hold (the Call Appearance key flashes).
4. Press the flashing Call Appearance key to retrieve the call.

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English