NEC Electra Elite IPK II System - Page 134

Document Revision 4C Electra Elite IPK II
2 - 110 Call Arrival (CAR) Keys
Related Features
Virtual Extensions
Programming
 11-04-01 Virtual Extension Numbering
Virtual Extension Ports (V-Ports) = 1~256
Virtual Extension Number = Extension Number
 15-01-01 Basic Extension Data Setup – Extension Name
Assign the extension name.
 15-01-05 Basic Extension Data Setup – Restriction for Outgoing Disable on Incoming Line
Enable (1)/Disable (0) supervised dial detection for an extension.
 15-02-07 Multiline Telephone Basic Data setup – Automatic Hold for CO Lines
0 = Hold
1 = Disconnect
 15-02-21 Multiline Telephone Basic Data Setup – Virtual Extension Access Mode (when idle Virtual
Extension key pressed)
Virtual Extension Key Mode 0 = DSS (default)
1 = OTG (Outgoing)
2 = Ignore
 15-07-01 Programmable Function Keys
KYxx = Key Number 01~32
KY01 =
03 (01 by default)
 15-08-01 Incoming Virtual Extension Ring Tone Setup
ICM Tone Pattern,
0 = Pattern 1 (default)
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
 15-09-01 Virtual Extension Ring Assignment
Mode1: 0 = No (default)
1 = Yes
 15-10-01 Incoming Virtual Extension Ring Tone Order Setup
Order 1 Pattern 0 = Pattern 1 (default)
Order 2 Pattern 1 = Pattern 2 (default)
Order 3 Pattern 2 = Pattern 3 (default)
Order 4 Pattern 3 = Pattern 4 (default)