NEC Electra Elite IPK II System - Page 135

Electra Elite IPK II Document Revision 4C
Call Arrival (CAR) Keys 2 - 111
 15-11-01 Virtual Extension Delayed Ring Assignment
KY01 Mode1: 1 = Yes
0 = No
 15-18-01 Virtual Extension Key Enhanced Options – Virtual Extension Key Operation Mode
0 = Release
1 = Land On
 15-18-02 Virtual Extension Key Enhanced Options – Display Mode When Placing a Call on Virtual
Extension Key
0 = Virtual Extension
1 = Real Extension
 20-04-03 System Options for Virtual Extensions – CAR/SIE/Virtual Extension Delay Interval
Delay = 10 sec. (default)
 20-06-01 Class of Service for Extensions
Mode1: Class No. = 1 (default)
 20-07-10 Class of Service Options (Administrator Level) – Programmable Function Key
Programming (Appearance Level)
1 = On (default)
0 = Off
 20-10-08 Class of Service Options (Answer Service) – Virtual Extension Off-Hook Answer
0 = Off
1 = On (default)
 20-13-27 Class of Service Options (Supplementary Service) – Busy on Seizing Virtual Extension
1 = On (default)
0 = Off
 21-01-15 System Options for Outgoing Calls – Outgoing Disable on Incoming Line (Toll
Restriction)
0 = Off (default)
1 = On
 23-04-01 Ringing Line Preference for Virtual Extensions
Order 1 Stg Group = 0~64 ( 0 by default)
Order 2 Stg Group = 0~64 ( 0 by default)
Order 3 Stg Group = 0~64 ( 0 by default)
Order 4 Stg Group = 0~64 ( 0 by default)
Operation
To answer a call ringing a Call Arrival (CAR) Key:
1. Press the flashing Call Arrival (CAR) Key.