NEC Electra Elite IPK II System - Page 147

Electra Elite IPK II Document Revision 4C
Call Forwarding 2 - 123
5. Press Speaker or hang up.
 Refer to Call Forwarding, Off-Premise on page 2-133.
 The Call Forwarding Programmable Function Key turns on.
To cancel Call Forward – Busy/No Answer at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Busy/No Answer Service Code (default: 744).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(PRG 15-07-01, 13 or SC 751, Key Code 13)
3. Dial 0 (Cancel).
4. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key turns off.
To set Call Forward – Both Ring at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Both Ring Service Code (default: 745).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(PRG 15-07-01, 14 or SC 751, Key Code 14)
3. Dial 1 (Set).
4. Dial the destination extension number.
5. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key turns on.
To cancel Call Forward – Both Ring at a forwarding station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Both Ring Service Code (default: 745).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(PRG 15-07-01, 14 or SC 751 Key Code 14)
3. Dial 0 (Cancel).
4. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key turns off.