NEC Electra Elite IPK II System - Page 148

Document Revision 4C Electra Elite IPK II
2 - 124 Call Forwarding
To set Call Forward – Follow Me from the destination station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Follow Me Service Code (default: 746).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(PRG 15-07-01, 10 or SC 751, Key Code 15)
3. Dial 1 (Set).
4. Dial the station number to be forwarded and then the destination number.
5. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key comes on.
To cancel Call Forward – Follow Me from the destination station:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward – Follow Me Service Code (default: 746).
- OR -
At the multiline terminal only, press the Call Forwarding Programmable Function keys.
(PRG 15-07-01, 10 or SC 751, Key Code 15)
3. Dial 0 (Cancel).
4. Dial the station number, which is forwarded, or 0 to cancel all extensions.
5. Press Speaker or hang up.
 The Call Forwarding Programmable Function Key goes off.
To set Call Forward Immediate for any Extension to Destination:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward Immediate for any Extension to Destination Service Code (Default: 790).
3. Dial 1 (Set).
4. Dial the extension number to be forwarded and then the destination number.
5. Press Speaker or hang up.
To cancel Call Forward Immediate for any Extension:
1. Pick up the handset or press Speaker.
2. Dial the Call Forward Immediate for any Extension to Destination Service Code (default: 790).