NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Call Forwarding, Off-Premise 2 - 135
Related Features
Call Arrival (CAR) Keys
Call Forwarding
Code Restriction
Direct Inward Dialing (DID)
Do Not Disturb
Door Box
Virtual Extensions
Voice Response System (VRS)
Programming
 10-09-01 DTMF and Dial Tone Circuit Setup
Allocate the circuits on the CPUII ETUs for either DTMF receiving or dial tone detection. PRG
14-01-13 Basic Trunk Data Setup – Loop Supervision Enable (1) loop supervision for each
trunk that should be able to use Call Forwarding Off-Premise.
 11-11-01 Service Code Setup (for Setup/Entry Operation) – Call Forward – All
Assign the Call Forward – All Service Code (default: 741).
 11-11-02 Service Code Setup (for Setup/Entry Operation) – Call Forward – Busy
Assign the Call Forward – Busy Service Code (default: 742).
 11-11-03 Service Code Setup (for Setup/Entry Operation) – Call Forward – No Answer
Assign the Call Forward – No Answer Service Code (default: 743).
 11-11-04 Service Code Setup (for Setup/Entry Operation) – Call Forward – Busy/No Answer
Assign the Call Forward – Busy No Answer Service Code (default: 744).
 11-11-05 Service Code Setup (for Setup/Entry Operation) – Call Forward – Both Ring
Assign the Call Forward – Both Ring Service Code (default: 745).
 11-11-45 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward All (Split)
Assign the Call Forward All (Split) Service Code (default not assigned).
 11-11-46 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward Busy (Split)
Assign the Call Forward Busy (Split) Service Code (default not assigned).

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English