NEC Electra Elite IPK II System User Manual

Document Revision 4C Electra Elite IPK II
2 - 136 Call Forwarding, Off-Premise
 11-11-47 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward No Answer
(Split)
Assign the Call Forward No Answer (Split) Service Code (default not assigned).
 11-11-48 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward Busy/No
Answer (Split)
Assign the Call Forward Busy No Answer (Split) Service Code (default not assigned).
 11-11-49 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward Both Ring
(Split)
Assign the Call Forward Both Ring (Split) Service Code (default not assigned).
 11-11-52 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward All Destination
(No Split)
Assign the Call Forward All for any Extension Service Code (default: 790).
 11-11-53 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward Busy
Destination (No Split)
Assign the Call Forward Busy for any Extension Service Code (default: 791).
 11-11-54 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward No Answer
Destination (No Split)
Assign the Call Forward No Answer for any Extension Service Code (default: 792).
 11-11-55 Service Code Setup (for Setup/Entry Operation) – Set/Cancel Call Forward Busy/No
Answer Destination (No Split)
Assign the Call Forward Busy No Answer for any Extension Service Code (default: 793).
 15-07-01 Programmable Function Keys
 20-06-01 Class of Service for Extensions
Assign Class of Service (1~15) to an extension.
 20-09-01 Class of Service Options (Incoming Call Service) – Second Call for DID/DISA/DIL/E&M
Override
Turn off or on the extension ability to receive a second call from a DID, DISA, DIL, or tie line
caller.
 20-09-07 Class of Service Options (Incoming Call Service) – Call Queuing
Turn off or on an extension user ability to have calls queued if a call rings the extension when it
is busy.
 20-11-12 Class of Service Options (Hold/Transfer Service) – Call Forwarding Off-Premise (External
Call Forwarding)
Enable (1)/Disable (0) setting up Call Forwarding Off-Premise at the extension.
 20-13-05 Class of Service Options (Supplementary Service) – Intercom Off-Hook Signaling
Turn off or on an extension ability to receive Off-Hook signals.

NEC Electra Elite IPK II System Specifications

General

System Type	Hybrid
VoIP Support	Yes
ISDN Support	Yes
T1/E1 Support	Yes
Caller ID	Yes
Voicemail	Yes
Auto Attendant	Yes
Music on Hold	Yes
Conference Calling	Yes
Call Forwarding	Yes
Call Transfer	Yes
Call Waiting	Yes
Power Requirements	100-240 VAC, 50/60 Hz
Type	Telephone System
Analog Ports	Yes
Digital Ports	Yes
Compatibility	NEC Digital and IP Phones, Analog Phones
Dimensions	Varies depending on chassis and expansion cards
Weight	Varies depending on chassis and expansion cards