NEC Electra Elite IPK II System - Page 164

Document Revision 4C Electra Elite IPK II
2 - 140 Call Forwarding, Off-Premise
501~548 = DISA/VRS Message
1000~1999 = Speed Dial Bin Number (000~999)
 If the Transfer Destinations are busy or receive no answer, those calls are transferred to the final transfer
destination (Program 22-10).
Operation
To activate Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code.
- OR -
At a multiline terminal only, press the Call Forwarding Programmable Function keys (PRG
15-07-01, PRG 15-07-10 ~PRG 15-07-15 or SC 751 Key Code 10~15).
3. Dial 1 (Set).
4. Dial the Trunk Access Code (default: 9) + Number (9+2142622000).
 Trunk access codes are 9 (ARS/Trunk Group Routing), 704 + Line Group (1~9, 01~99 or 001~100) or #9 + Line
number (e.g., 05 or 005 for line 5).
 Your DND or Call Forwarding (Device) Programmable Function key flashes.
To cancel Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forward Access Code (default not assigned).
3. Dial 0 (Cancel).
To activate Call Forwarding Off-Premise Split:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code.
3. Dial 1 (Set).