NEC Electra Elite IPK II System - Page 163

Electra Elite IPK II Document Revision 4C
Call Forwarding, Off-Premise 2 - 139
 13-04-01 Speed Dialing Number and Name – Speed Dialing Data
Enter the Common and Group Speed Dialing numbers and names which are used for Trunk-to-
Trunk Forwarding.
 14-01-04 Basic Trunk Data Setup – Transmit Gain Level for Conference and Transfer Calls
Use CODEC gain set at 0 dB [PRG 14-01-04 = 32 (CODEC Gain Type 2)] to set the CODEC
gain level for multiline Conference or transferred calls.
 14-01-05 Basic Trunk Data Setup – Receive Gain Level for Conference and Transfer Calls
Use CODEC gain set at 0 dB [PRG 14-01-04 = 32 (CODEC Gain Type 2)] to set the CODEC
gain level for multiline Conference or transferred calls.
 14-06-01 Trunk Group Routing
Set up an outbound routing table for the trunk groups you assign in Program 14-05-01. When
users dial 9, the system routes their calls in the order (priority) you specify.
 15-07-01 Programmable Function Keys
Assign an Automatic Forwarding at Department Group key (58) or a Delayed Forwarding at
Department Group key (59) for an extension user.
 16-02-01 Department Group Assignment for Extensions
Assign extensions to Department Groups (1~64) and set the priority assignment.
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
 20-11-17 Class of Service Options (Hold/Transfer Service) – Department Group Trunk-to-Trunk
Transfer (Each Telephone Group Transfer)
Enable (1)/Disable (0) an extension in a Department Group ability to use the Trunk-to-Trunk
Forwarding service codes.
 24-05-01 Department Group Transfer Target Setup
Assign the Speed Dialing number bin (0~1999) which should be used as the destination of the
Department Group Trunk-to-Trunk Forwarding.
Trunk-to-Trunk Forwarding – DID (3) Trunk Forwarding Using DID Translation Table

Refer to Direct Inward Dialing (DID) for additional DID programming.
 22-11-05 DID Translation Table Number Conversion – Transfer Destination Number 1
22-11-06 DID Translation Table Number Conversion – Transfer Destination Number 2
For each DID Translation Table entry (1-2000), specify the first and second Transfer
Destinations if the callers receives a busy or no answer (action defined in PRG 22-11-04).
Destination Options:
0 = No Setting
1~100 = Incoming Group
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
01~264 = Department Group
400 = DID
401 = DISA