NEC Electra Elite IPK II System User Manual

Document Revision 4C Electra Elite IPK II
2 - 146 Call Forwarding – Park and Page
Default Setting
 Park and Page is available at default for internal paging access code 701, zone 1.
 Use access code of 713. See feature Operation. Set PRG 40-10-01 for VRS guidance
message.
System Availability
Terminals
None
Required Component(s)
Voice Response System (VRS) card and DSPII-U10 Unit
Related Features
Analog Communication Interface (ACI)
Music on Hold
Programming
 11-11-58 Service Code Setup (for Setup/Entry Operation) – Call Forward with Personal Greeting
Call forward with Personal greeting VRS. Service code setup. Default set to 713.
 11-12-19 Service Code Setup (for Service Access) – Internal Group Paging
Service code setup. Default set to 701.
 11-12-20 Service Code Setup (for Service Access) – External Paging
External paging access code. Service code setup. Default set to 703.
 11-12-24 Service Code Setup (for Service Access) – Combined Paging
Combined paging, internal/external access code. Service code setup. Default set to 1.
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
 31-02-01 Internal Paging Group Assignment – Internal Paging Group Number
Assign extensions to Internal Paging Groups (i.e., Page Zones).

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English