EasyManuals Logo

NEC Electra Elite IPK II System User Manual

NEC Electra Elite IPK II System
1190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
Electra Elite IPK II Document Revision 4C
Call Forwarding – Park and Page 2 - 147
31-03-01 Internal Paging Group Settings – Internal Paging Group Name
Assign names to Internal Paging Groups (i.e., Page Zones). The system shows the names you
program on the telephone displays.
31-04-01 External Paging Zone Group – Paging Group Number
Assign each External Paging Speaker to an External Paging Zone.
31-06-01 External Speaker Control – Broadcast Splash Tone Before Paging (Paging Start Tone)
Enable (1)/Disable (0) splash tone before Paging over an external zone. If enabled, the system
broadcasts a splash tone before the External Paging announcement.
The paging chime overrides the first four seconds of the announcement. Allow a delay in announcement
recording for chime time.
31-06-02 External Speaker Control – Broadcast Splash Tone After Paging (Paging End Time)
Enable (1)/Disable (0) splash tone after Paging over an external zone. If enabled, the system
broadcasts a splash tone at the end of an External Paging announcement.
40-10-01 Voice Announcement Service Option – VRS Fixed Message
Enable (1)/Disable (0) the system ability to play the fixed VRS messages (such as “You have a
message.”).
40-10-05 Voice Announcement Service Option – Park and Page Repeat Timer (VRS Msg Resend)
If a Park and Page is not picked up in this time, the Paging announcement repeats.
Operation
To have the system page you when you have a call:
1. Press Speaker (or lift the handset at the single line telephone) and dial 713.
2. When you hear, “Please start recording,” record you Personal Greeting.
If you already have Park and Page or Personal Greeting set up, you can dial:
3 to erase (the optionally HOLD to cancel the erase)
5 to listen (then # again to listen again)
7 to re-record
3. Dial #7.
4. When you hear, “Please start recording,” record your page and dial
# when the announcement is
complete.
A paging chime overrides the first four seconds of an announcement. Allow a delay in announcement recording
for chime time.
5. Dial the Page Zone that should broadcast your announcement.
For example, for Internal Zone 1 dial 701 + 1, or for Combined Paging Zone, 1 dial 1 + 1.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC Electra Elite IPK II System and is the answer not in the manual?

NEC Electra Elite IPK II System Specifications

General IconGeneral
BrandNEC
ModelElectra Elite IPK II System
CategoryTelephone System
LanguageEnglish

Related product manuals