NEC Electra Elite IPK II System - Page 197

Electra Elite IPK II Document Revision 4C
Caller ID 2 - 173
Default Setting
Disabled
System Availability
Terminals
All Multiline Terminals with a display and Single Line Telephones equipped to receive Caller ID
Required Component(s)
 COIB(4)-U( ) ETU (in COID mode)
 COIB(8)-U( ) ETU (in COID mode)
 BRT(4)-U(20) ETU with Firmware 3.00 or higher
 DTI-U40 ETU with Firmware 5.0 or higher
 SLIB/E-U( ) (in COID mode)
Related Features
Automatic Route Selection
Call Arrival (CAR) Keys
Caller ID Call Return
Conference, Voice Call/Privacy Release
Cordless II/Cordless Lite II Telephones
One-Touch Calling
Park
Speed Dial – System/Group/Station
Station Message Detail Recording
T1 Trunking (with ANI/DNIS Compatibility)