NEC Electra Elite IPK II System - Page 201

Electra Elite IPK II Document Revision 4C
Caller ID 2 - 177
Operation
Storing a Number
To store a Caller ID number in an Speed Dial bin:
1. With an idle multiline terminal the display shows:
2. Press the LIST Softkey. The display shows:
3. Press the CID Softkey (Caller ID). The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
 = Preview List
 = Next List
Store = Store in List
DEL = Delete from List
4. Press the STORE Softkey. The display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
STA = Store in Station Speed Dial bin.
SYS - Store in System Speed Dial bin.
5. Press the STA or SYS Softkey. The display shows:
1-01 FRI 09:00AM
301 STA 301
LIST DIR ICM PROG
LIST MENU
Redial CID
##: xxxxxxxxxxxxx
mm-dd hh:mm
  Store DEL
##: xxxxxxxxxxxxx
mm-dd hh:mm
STA SYS
Store to SYS: COMMON
ENTER BIN