NEC Electra Elite IPK II System - Page 243

Electra Elite IPK II Document Revision 4C
Class of Service 2 - 219
Table 2-13 Class of Service Options for DISA/E&M Service, Program 20-14
Item
No.
Item
Input
Data
Default
COS
01~14
COS 15
01
First Digit Absorption (Delete First Digit Dialed)
For Tie Lines, Enable/Disable the ability to absorb (ignore)
the first incoming digit. Use this to make the tie trunk
compatible with 3- and 4-digit Tie Line service. This option
does not apply to DISA.
0 = Off
1 = On
00
02
Trunk Group Routing/ARS Access
Enable/Disable a DISA or tie trunk caller ability to dial 9 for
Trunk Group Routing or Automatic Route Selection (ARS).
0 = Off
1 = On
11
03
Trunk Group Access
Enable/Disable a DISA or tie trunk caller ability to access
trunk groups for outside calls (Service Code 704).
0 = Off
1 = On
11
04
Outgoing System Speed Dialing
Enable/Disable a DISA or tie trunk caller ability to use
System Speed Dialing.
0 = Off
1 = On
00
05
Operator Calling
Enable/Disable a DISA or tie trunk caller ability to dial 0 for
the telephone system operator.
0 = Off
1 = On
11
06
Internal Paging
Enable/Disable a DISA or tie trunk caller ability to use the
telephone system Internal Paging.
0 = Off
1 = On
11
07
External Paging
Enable/Disable a DISA or tie trunk caller ability to use the
telephone system External Paging.
0 = Off
1 = On
11
08
Direct Trunk Access
Enable/Disable a DISA or tie trunk caller ability to use Direct
Trunk Access (Service Code 715).
0 = Off
1 = On
00
09
Forced Trunk Disconnect <Not for ISDN T-point>
Enable/Disable a tie trunk caller ability to use Forced Trunk
Disconnect (Service Code
26). This option is not available
to DISA callers.
0 = Off
1 = On
00
10 Call Forward Setting by Remote via DISA
Enable/Disable a DISA callers ability to use the Call Forward
service codes (PRG 11-11-01 through PRG 11-11-05).
0 = Off
1 = On
00
11
DISA/Tie Trunk Barge-In
Enable/Disable a DISA or tie trunk caller ability to use
Barge-In.
0 = Off
1 = On
00