NEC Electra Elite IPK II System - Page 244

Document Revision 4C Electra Elite IPK II
2 - 220 Class of Service
Operation
To change an extension Class of Service (via Service Code 677):
1. Press Speaker.
2. Dial 677.
3. Dial the extension number you want to change.
 You see: MODE1:nn
Press Hold to leave the current value unchanged.
The extension you dial may be set to block your attempt to change their Class of Service.
4. Enter the Day 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE2:nn
Press Hold to leave the current value unchanged.
5. Enter the Night 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE3:nn
Press Hold to leave the current value unchanged.
6. Enter the Midnight 1 Mode Class of Service for the extension you selected in step 3 and press
Hold.
 You see: MODE4:nn
Press Hold to leave the current value unchanged.
7. Enter the Rest 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE5:nn
Press Hold to leave the current value unchanged.
8. Enter the Day 2 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE6:nn
Press Hold to leave the current value unchanged.
9. Enter the Night 2 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE7:nn
Press Hold to leave the current value unchanged.
12
Retrieve Park Hold
Turn off or on the ability for a DISA caller to retrieve parked or
held calls.
0 = Off
1 = On
11
Table 2-13 Class of Service Options for DISA/E&M Service, Program 20-14 (Continued)
Item
No.
Item
Input
Data
Default
COS
01~14
COS 15