NEC Electra Elite IPK II System - Page 264

Document Revision 4C Electra Elite IPK II
2 - 240 Code Restriction, Dial Block
Required Component(s)
None
Related Features
None
Programming
 11-10-17 Service Code Setup (for System Administration) – Dial Block by Supervisor
Assign a service code (601 by default) used by the supervisor to set Dial Block for another
extension.
 11-11-33 Service Code Setup (for Setup/Entry Operation) – Dial Block
Assign a service code (600 by default) used for Dial Block.
 20-06-01 Class of Service for Extensions
Assign a COS to each extension (1~15).
 20-08-08 Class of Service Options (Outgoing Call Service – Toll Restriction Dial Block
Enable (1)/Disable (0) an extension user ability to use Dial Block.
 21-09-01 Dial Block Setup – Toll Restriction Class with Dial Block
Assign a Code Restriction COS (1~15) when the Dial Block feature is used.
 21-09-02 Dial Block Setup – Supervisor Password
Assign a 4-digit password to be used by the supervisor to enable/disable Dial Block for other
extensions.
 21-10-01 Dial Block restriction Class per Extension
Assign the Code Restriction COS (1~15) used by an extension when the Dial Block feature is
enabled. If this data is 0, Code Restriction COS follows Program 21-09-01.
 90-19-01 Dial Block Release
Enter the extension number to be released from the Dial Block Restriction. This program can be
used when a password is forgotten by the user.