To Next Page

To Previous Page

Document Revision 4C Electra Elite IPK II

2 - 16 Account Code Entry

1. Dial .

- OR -

Press your Account Code key (PRG 15-07 or SC 751: code 50).

2. Dial your Account Code (1~16 digits, using 0~9 and

#).

 If Account Codes are hidden, each digit you dial shows an  on the telephone display.

3. Dial .

- OR -

Press your Account Code key (PRG 15-07 or SC 751: code 50).

To enter an Account Code before dialing the outside number:

If your system has Forced Account Codes, you must use this procedure. If it has Verified Account

Codes, you can use this procedure instead of letting the system prompt you for your Account Code. You

may also use this procedure if your system has Optional Account Codes.

If your system has Verified Account Codes enabled, be sure to choose a code programmed into your

Verified Account Code list.

1. Access trunk for outside call.

 Press a line key or dial a code (except 9) to access a trunk. Refer to Central Office Calls, Placing on page 2-195

for more information.

2. Dial .

- OR -

Press your Account Code key (PRG 15-07 or SC 751: code 50).

3. Dial your Account Code (1~16 digits, using 0~9 and

#).

 If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,

each digit you dial shows an

 on the telephone display.

4. Dial .

- OR -

Press your Account Code key (PRG 15-07 or SC 751: code 50).

5. Dial the number you want to call.

 If you hear “stutter dial tone after dialing the number, ARS is requesting you to enter an Automatic Route

Selection Authorization Code. Refer to Automatic Route Selection on page 2-83 for more information.

NEC Electra Elite IPK II System User Manual

Questions and Answers: