NEC Electra Elite IPK II System - Page 423

Electra Elite IPK II Document Revision 4C
D
term
Cordless Lite II Terminal 2 - 399
Programming
 10-03-01 ETU Setup
Terminal Type (B1) for ESI
 15-07 Programmable Function Keys
 20-07 Class of Service Options (Administrator Level)
Refer to Table 2-6 Class of Service Options (Administrator Level), Program 20-07 on page
2-205.
 20-08 Class of Service Options (Outgoing Call Service)
Refer to Table 2-7 Class of Service Options (Outgoing Call Service), Program 20-08 on page
2-207.
 20-09 Class of Service Options (Incoming Call Service)
Refer to Table 2-8 Class of Service Options (Incoming Call Service), Program 20-09 on page
2-209.
 20-10 Class of Service Options (Answer Service)
Refer to Table 2-9 Class of Service Options (Answer Service), Program 20-10 on page 2-210.
 20-11 Class of Service Options (Hold/Transfer Service)
Refer to Table 2-10 Class of Service Options (Hold/Transfer Service), Program 20-11 on page
2-211.
 20-12 Class of Service Options (Charging Cost Service)
Refer to Table 2-11 Class of Service Options (Charging Cost Service), Program 20-12 on page
2-214.
 20-13 Class of Service Options (Supplementary Service)
Refer to Table 2-12 Class of Service Options (Supplementary Service), Program 20-13 on page
2-215.
 20-14 Class of Service Options for DISA/E&M
Refer to Table 2-13 Class of Service Options for DISA/E&M Service, Program 20-14 on page
2-219.
Operation
To set up and program the D
term
Cordless Lite II (DTH-4R-1):
1. Press and hold down
 and #, then press TALK. The F1 LED flashes red and F1=LK01 is
displayed on the LCD.
2. Press Ring/Vol repeatedly to scroll through the line key (LK) and feature options for function key
F1.