NEC Electra Elite IPK II System - Page 45

Electra Elite IPK II Document Revision 4C
Account Code – Forced/Verified/Unverified 2 - 21
 When you use Forced Account Code on only toll calls, and you dial a local call, you hear a
beep.
 The Timer set in 21-01-14 is applied to toll calls and local calls.
 Speed Dial – System/Group/Station bins can contain stored Account Codes. They can be
prevented from being displayed using 20-07-04.
 Automatic Route Selection (ARS) can force a user to enter an Authorization Code prior to
using a certain route. The system verifies the ARS Authorization Code dialed against the
ARS Authorization Code list (Program 44-03).
 To simplify Account Code Entry, store the Account Code (e.g.,
1234) in a One-Touch
Key, and press the key instead of dialing the code.
 Account Codes appear on the SMDR report (even if they are hidden on the telephone
display).
 When using a PBX/CTX trunk and Account Codes, do not use
 as part of the PBX/CTX
access code. Otherwise, after the
, the trunk stops sending digits to the central office.
 Account Codes for incoming calls not available for single line telephones.
Default Settings
Account Codes are disabled.
System Availability
Terminals
Any Station
Required Component(s)
VRS for Forced Account Codes for Single Line Telephones
Related Features
Automatic Route Selection
PBX Compatibility
Speed Dial – System/Group/Station