NEC Electra Elite IPK II System - Page 473

Electra Elite IPK II Document Revision 4C
Flexible System Numbering 2 - 449
 Any feature which requires dialing a code or extension number can be affected.
 When the system searches the Dial Extension Analyze Table (PRG 11-20-01), it uses
prefix searching, giving the lower table number the higher priority. For example, if the user
programs 211 in table 1 and 2113 in table 2, then dials 2113, the system selects table 1.
 Program 11-01-01 9: System Numbering – Dial Extension Analyze is not supported in
Version 1600.
 Program 11-20-01: Dial Extension Analyze Table – Dial and Program 11-20-02: Dial
Extension Analyze Table – Type of Dials are not supported in Version 1600.
Default Setting
Extensions and Virtuals are numbered in the following order:
Program 11-02-01 and Program 11-04-01
 Physical Extensions:
 Extn Port 1 = 101 ~ Extn Port 99 = 199
 Extn Port 100 = 3101 ~ Extn Port 256 = 3257
Example for 310X Example for 3100X
10s Group
(4-digit)
100s Group
(5-digit)
11-01-01 = Dial 3
31 Digit 4 = (9)Dial Extension Analyze Table
11-01-01 = Dial 3
31 Digit 7 = (9)Dial Extension Analyze Table
11-20-01 Table 1 = Dial 310 11-20-01 Table 1 = Dial 3100
11-20-02 Table 1 = Intercom 11-20-02 Table 1 = Intercom
Example for 31000X Example for 310000X
1000s Group
(6-digit)
10,000s Group
(7-digit)
11-01-01 = Dial 3
31 Digit 4 = (9)Dial Extension Analyze Table
11-01-01 = Dial 3
31 Digit 7 = (9)Dial Extension Analyze Table
11-20-01 Table 1 = Dial 31000 11-20-01 Table 1 = Dial 310000
11-20-02 Table 1 = Intercom 11-20-02 Table 1 = Intercom